Profile
Dr. Ankursinh Solanki completed his Ph. D. from Gujarat Technological University, Ahmedabad. He has recieved grant of INR 1,50,000 /- from SOIC organized by Higher & Technical Education Department, Government of Gujarat for his research innovation. He was honoured with the certificate of recognition by Mr. Bhupendrasinh chudasama (Honourable Education Minister, Gov. of Gujarat) and by Mrs. Anju Sharma, (Principal Secretary – Higher and Technical Education). He has completed M. E. (Thermal Engg.) from SVMIT, Bharuch in the year 2014 with Distinction. He has a total teaching experience of 6 years and 9 months. Currently He is working as an Assistant Professor in Mechanical Engineering Department at R.N.G. Patel Institute of Technology- RNGPIT, Isroli, Bardoli
apsolanki@rngpit.ac.in
D-007
Dr. Ankursinh P. Solanki
Assistant Professor
Ph.D, M.E- Thermal Engg.
Experience 9 Year 6 Month
Area of Specialization
Refrigeration, Two phase flow, Air conditioning, Heat Transfer
Subjects Taught
UG: Refrigeration & Air Conditioning, Fluid Mechanics, Heat Transfer, Mechanics of Solids, Power plant Engineering, Applied Thermal and Hydraulic Engineering PG: Advanced Refrigeration Engineering, Advanced Fluid mechanics, T
Membership
Qualifications
Qualification | University | Passing Year |
---|---|---|
Ph. D. | GTU, Ahemdabad | 2024 |
M.E (Thermal Engg.) | SVMIT, Bharuch | 2014-06-12 |
B.E. (Mechanical Engg. | CKPCET, Surat | 2012-06-12 |
Publications
International Journal
Review Paper on Selection of Working Fluid and Parameters affecting the Performance of Close Loop Pulsating Heat Pipe. International Journal of Science & Engineering Development Research
Duration: 2017
Thermoelectric power generation using waste heat energy. International Journal of Advance Research in Engineering Science and Technology
Duration: 2017
Thermoelectric power generation using waste heat energy. International Journal of Advance Research in Engineering Science and Technology
Duration: 2017
Experimental analysis of close loop pulsating heat pipe at different filling ratio. International Journal of Engineering Development and Research
Duration: 2014
A paper published entitled “Review of the effect of foldability and working fluid on the performance of flexible pulsating heat pipe for foldable applications”, Materials Today: Proceedings (2023). https://doi.org/10.1016/j.matpr.2023.01.177
Duration: 2023
A paper published entitled “Effect of foldability on the start‑up behavior and thermal performance of flexible pulsating heat pipe”, Heat Mass Transfer (2022). https://doi.org/10.1007/s00231-022-03273-4
Duration: 2022
A paper presented entitled “Review of the effect of foldability and non-conventional working fluid on the performance of flexible pulsating heat pipe for foldable applications” in International Conference on Future Trends in Materials and Mechanical Engineering (ICFTMME-2022) organized by Department of Mechanical and Automobile Engineering, SRM IST, Delhi-NCR campus, Gaziabad.
Duration: 2022
EXPERT LECTURE DELIVERED
1. Mr. A.P. Solanki has delivered Webinar on “Fundamental concepts of Refrigeration Systems and Recent Trends” on in the webinar series organized by N. G. Patel polytechnic, Isroli.
2. Delivered expert talk on “Basics of Heat Transfer and Recent Trends in Thermal Management of Electronics” on 11th October, 2023 at C. K. Pithwala College of Engineering and Technology, Surat.
3. Delivered expert lecture on “Basics of Refrigeration: From History to Recent Trends” on 26th August, 2021 at N. G. Patel polytechnic, Isroli.
FDP/STTP/WORKSHOP ATTENDED
Mr. A. P. Solanki has Participated in Five days webinar on “Energy Conservation, Efficiency and Energy management” Organized by TAPI Diploma Engineering college, Surat
Duration: 2020-12-14 2020-12-18
Attended AICTE Training And Learning (ATAL) Academy Online FDP on “Teaching Learning Using MATLAB” organized by GURU GHASIDAS VISHWAVIDYALAYA, Bilaspur, Chhattisgarh from
Duration: 2020-11-24 2020-11-28
Attended AICTE Training And Learning (ATAL) Academy Online FDP on “Capacity building-Life skills” organized by University of Petroleum and Energy studies, Dehradun from
Duration: 2020-10-12 2020-10-16
Attended TEQUIP-III sponsored one week e-STC on “Multi-Scale Computational Fluid Dynamics: Fundamentals and Applications” organized by Dr B R Ambedkar National Institute of Technology Jalandhar (NIT Jalandhar), Punjab from
Duration: 2020-09-21 2020-09-25
Participated in Four days online faculty development program on “CAD/CAE- Solidworks& Ansys” Organized by N. G. Patel polytechnic, Isroli with SOPAN institute and Aspire Designs
Duration: 2020-06-27 2020-06-30
Successfully completed the module of Elsevier Research Academy entitled as “Structuring your article correctly” on
Duration: 2020-06-05
Successfully completed the module of Elsevier Research Academy entitled as “How to prepare manuscript” on
Duration:2020-06-05
Successfully completed the module of Elsevier Research Academy entitled as “Guide to reference managers” on
Duration: 2020-06-05
Participated in the webinar on “Introduction to Ansys Mechanical and its Applications” organized by R. N. G. Patel Institute of Technology on
Duration: 2020-11-24 2020-11-28
Participated in e-FDP on “Teaching in Uncertain Times: Opportunities and Challenges” jointly organized by GTU, Ahmedabad and BITS Edu Campus, Vadodara from
Duration: 2020-04-30 2020-05-05
Participated in e-FDP on “Teaching in Uncertain Times: Opportunities and Challenges” jointly organized by GTU, Ahmedabad and BITS Edu Campus, Vadodara from
Duration: 2020-04-30 2020-05-05
Attended “Retailer Training Program” of Bureau of Energy Efficiency (BEE) jointly organized by VGU, Jaipur and Design2Occupancy services LLP, Jaipur on
Duration: 2020-11-24 2020-11-28
Attended One week vocational training at Godrej Industries Ltd, Valia from
Duration: 2017-06-12 2017-06-17
Attended One Week STTP on “Destructive and Non- Destructive Testing of Boilers, Pressure Vessel and Chemical Equipments” jointly organized By Nodal Institute NGPIT and Faculty of Engineering Technology & Research,Bardoli in
Duration: October 2015
Attended Two days workshop “Application, Selection and Maintenance of Pumps” at Faculty of Engineering Technology & Research,Bardoli on
Duration:2015-01-30 2015-01-31
Attended refresher course on “Operation, selection & Maintenance of Centrifugal Pumps” organized by SRICT, Ankleshwar on
Duration: 2015-01-10
Attended Two Days workshop on “Steam, Fuels & combustion and Water Treatment for Boilers” at Faculty of Engineering Technology & Research,Bardoli on
Duration: 2014-06-23 2014-06-24
Attended Two Days workshop on “Steam, Fuels & combustion and Water Treatment for Boilers” at Faculty of Engineering Technology & Research,Bardoli on
Duration:2014-06-23 2014-06-24
Attended Two Days workshop on “Steam, Fuels & combustion and Water Treatment for Boilers” at Faculty of Engineering Technology & Research,Bardoli on
Duration: 2014-06-23 2014-06-24
Achivements
Published design patent entitled “A FIXTURE FOR SURFACE ROUGHNESS TESTING”. This patent has been accepted and published by The Patent Office, Government of India (Design No: 392677-001).
Contributed as a Co-author of a book "Engineering Thermodynamics" for the 3rd semester Mechanical Engineering students of GTU and it is published by Tech-Neo publications (ISBN: 978-93-91472-05-4).
Mr. A.P. Solanki has guided 2 P.G(Thermal Engineering) students in their dissertation work
Mr. A.P. Solanki has completed 8 week NPTEL certification course on "Refrigeration and Air conditioning" (IIT Roorkee) and passed examination with Elite certificate and 5% topper pool.
Received grant of INR 1,50,000/- for the innovation entitled “Development of flexible pulsating heat pipe for effective thermal management of foldable electronics” under SOIC scheme of SSIP from Government of Gujarat. (Sanction Date: 27/12/2019)
Honored with certificate of reorganization from Shi Bhupendrasinh Chudasama, Ex. Honorable Education Minister, Gov. of Gujarat and Smt. Anju Sharma, Principal Secretary, Higher and Technical Education Department, Gov. of Gujarat for receiving the grant of my research innovation
Invited as a Jury member in the "3rd Convention of Quality Concepts" by Quality Circle Forum of India (QCFI)-Surat Chapter on 04/09/2021.
Invited as a Jury member in the "5th Convention of Quality Concepts" by Quality Circle Forum of India (QCFI)-Surat Chapter on 07/10/2023.
Mr. A. P. Solanki has successfully passed TOT program with "A" Grade and has been certified as a Trainer for O&M -Electrical and Instrumentation Technician, Wind power plant of VSDP by National Institute of Wind Energy (NIWE) and Ministry of New and Renewable Energy (MNRE), Govt. of India.
Mr. A. P. Solanki has successfully passed TOT program with "A" Grade and has been certified as a Trainer for O&M - Mechanical Technician, Wind power plant of VSDP by National Institute of Wind Energy (NIWE) and Ministry of New and Renewable Energy (MNRE), Govt. of India.
Mr. A. P. Solanki has successfully passed TOT program with "A" Grade and has been certified as a Trainer for Wind Resource Assessor and Site Surveyor, Wind power plant of VSDP by National Institute of Wind Energy (NIWE) and Ministry of New and Renewable Energy (MNRE), Govt. of India.