Common Engineering Facility Center(CEFC):
India’s first Common Engineering Facility Centre is managed by SETU Foundation, Surat.
Science, Engineering and Technological Upliftment Foundation (SETU)
A Section 8 Company (Not for Profit Organisation) incorporated under the Companies Act, 2013.
SETU Foundation is an SPV developed by
Surat Engineering Vikas Association (SEVA), Surat
Textile Machinery Manufacturers’ Association (TMMA), Mumbai along with support of Department of Heavy Industries (DHI), Ministry of Heavy Industries & Public Enterprises, Government of India
R N G Patel Institute of Technology – RNGPIT, (Bardoli)
India’s first Common Engineering Facility Centre received grant of 27 Cr. from Dept. of Heavy Industries(DHI), Ministry of Heavy Industries, Govt. of India.
Common Engineering Facility Centre established with a total cost of around 58+ Cr.
Centre provides 50+ on hand training modules for students.
Centre has various state of the art advance machineries.
Academic Benefit:
- Relevant Curriculum Development
- Industry Oriented approach
- IPR Facilitation
- On Job learning to students
- Image building
- Better Employability (Domestic & Int.)
- Pre-skilling of employees
- 50+ Training Modules for students
Industry Benefit:
- Skilled Manpower
- Innovation/Prototyping
- Timely job work through CEFC
- Low investment
- Enhanced Productivity
- IPR Facilitation
- Product Redesigning and Optimization
- Reduced Re-skilling Expense
- Quality Standardization
Resources Available At CEFC:
SLM®280 Metal 3D printing (Japan Based Company)
Machine Specification | |
Build Size | L 280 X W 280 X H 365 |
Productivity ( Build Rate) | Upto 88 cm3/Hr |
Max. Scan Speed | 10 m/s |
Multi laser – Twin laser- 2 *400W or 2* 700W | |
Machine Cost: 7 Cr | |
Mitutoyo CRYSTA Apex S-9108 CNC CMM Machine (Japan Based Company)
Machine Specification | |
Range | 900 x 1000 x 800 mm |
Loading Weight | 1200 kg |
Loading Height | 1000 mm |
Mass | 2261 kg |
Resolution | 0.0001mm (0.1µm) |
Machine Cost: 1.5 Cr | |
Hurco VMX42i CNC VMC Machine (US Based Company)
Machine Specification | |
Machine Weight | 6590kg |
Operating Dimensions (L x B x H) | 4645 x 3750 x 2770mm |
Table dimensions (W x D) | 1270 x 610mm |
Maximum weight on table | 1746kg |
Feed Rate | 32 m/min |
Spindle speed | 15000 RPM |
Machine Cost: 3 Cr | |
DMG DMC 650 V CNC VMC Machine (German Based Company)
Machine Specification | |
Machine Weight | 7250kg |
Machine dimensions ( W X D x H) | 3288 x 2275 x 2670mm |
Max Workpiece dimensions ( W X D x H) | 650 x 520 x 370mm |
Max workpiece weight | 800kg |
Feed Rate | m/min |
Spindle speed | 20000 RPM |
Machine Cost: 2.5 Cr | |
Mitsubishi MV2400R CNC Wire cut EDM (Japan Based Company)
Machine Specification | |
Max Workpiece dimensions ( W X D x H) | 1050 x 820 x 305mm |
Max workpiece weight | 1500kg |
Table dimensions (W x D) | 840 x 640mm |
Wire Diameter | 0.2 mm |
Machine Cost: 1.5 Cr | |
Mitsubishi EA28VA CNC Spark EDM (Japan Based Company)
Machine Specification | |
Machine dimensions ( W x D x H) | 1100 x 810 x 450mm |
Machine weight including power supply | 5400kg |
Table dimensions (W x D) | 850 x 600mm |
Max Workpiece weight | 2000kg |
Machine Cost: 70+ Lac | |
Mitsubishi ED2000MR CNC EDM Drilling (Japan Based Company)
Machine Specification | |
Max Workpiece dimensions ( W X D x H) | 480 x 210 x 155 mm |
Max workpiece weight | 200kg |
Machine Dimentions ( W X D x H) | 1000 x 1020 x 2070 mm |
Machine tool weight | 650kg |
Hole-Dia. (Min) | 0.3048 mm |
Machine Cost: 80 Lac | |
Okamoto Max-OD 300 Series-390 Cylindrical Grinding Machine
(Japan Based Company)
Machine Specification | |
Work swing over table | 320mm |
Floor space (W x D) | 4200 x 2330 mm |
work – maximum weight between center | 300kg |
work – maximum weight with chuck | 150kg |
Machine Cost: 90+ Lac | |
Vacuum Heat Treatment Furnace : 10 bar | Graphite
(Indian Based Company)
Machine Specification | |
Hot zone size | 900x900x1200 |
Hot zone type: | Graphite |
Temperature (DEG. C) | 1000-1400o C |
Machine Cost: 3 Cr | |